M&P Amusement

How to Set Up a Home Bubble Hockey Table

How to Set Up a Home Bubble Hockey Table

By M&P Amusement | Published: 2026-10-21

Category: How-to Guides

Learn the step-by-step process to assemble and set up your Super Chexx Pro Home Edition bubble hockey table for arcade-quality play at home.

Quick Answer

Setting up a home bubble hockey table like the Super Chexx Pro Home Edition requires careful unpacking, leveling, and assembly of the legs and dome. Focus on leveling the table first to ensure smooth puck movement and a fair game.

Why Leveling Matters First

Before you even attach the legs, place the table body on a flat surface and check it with a spirit level. Bubble hockey tables rely on a perfectly level playing field for the puck to slide evenly. An unlevel table makes the puck drift, ruining the fast-paced arcade feel. Use the adjustable leg levelers to correct any tilt before final assembly.

Assembling the Super Chexx Pro Dome

The dome is the signature feature of the Super Chexx Pro Home Edition. It consists of two half-shells that snap together over the playing surface. Align the locking tabs carefully and press firmly until you hear a click. A common mistake is forcing the dome together without aligning the tabs, which can crack the plastic. Work slowly around the perimeter.

Step-by-Step Setup Guide

  1. Unpack and Inspect: Carefully remove the table body, dome halves, leg set, and hardware from the box. Lay out all parts on a soft surface to avoid scratches. Verify you have the four legs, eight bolts, a hex key, and the LED power adapter. Do not throw away packaging until you confirm all parts are present.
  2. Level the Table Body: Place the table body upside down on a padded surface. Attach the four legs loosely using the provided bolts and hex key. Turn the table right-side up and place a spirit level on the playing surface. Adjust each leg's leveler foot until the bubble is centered. An unlevel table causes the puck to slide to one side—fix this before tightening any bolts fully.
  3. Connect the LED Lighting: Locate the LED power connector inside the table base. Plug the adapter into a nearby outlet and test the RGB lights before installing the dome. This step ensures you don't have to disassemble later if the lights don't work. Test the lights now; it's much harder to troubleshoot after the dome is sealed.
  4. Install the Dome: Align the two dome halves over the playing surface, matching the locking tabs. Press firmly along the seam until you hear each tab click into place. Ensure the dome sits flush against the table base all around. If the dome doesn't click easily, check for misaligned tabs—do not force it.
  5. Final Check and Play: Tighten all leg bolts securely with the hex key. Place a puck on the centerline and give it a gentle push. It should glide smoothly to the opposite end. If it drifts, re-level the table. Add players and start your first game. A puck that drifts means the table still needs leveling—adjust the leg levelers until it runs true.

Product Facts

  • Super Chexx Pro Home Edition Bubble Hockey: Super Chexx is the legendary and original bubble hockey table, now featuring LED Lighting and Light Show with RGB Spotlights. The LED lighting adds atmosphere and visibility, but you must connect the power adapter to the table base before seating the dome to avoid rework.
    Super Chexx Pro Home Edition Bubble Hockey
    Super Chexx Pro Home Edition Bubble Hockey

Shop Related Products

Super Chexx Pro Home Edition Bubble Hockey

Super Chexx Pro Home Edition Bubble Hockey

$2834.70 $4295.00

Shop Now