How to Set Up Your Home Dartboard of Champions

By M&P Amusement | Published: 2026-10-24

Category: How-to Guides

Learn how to install and calibrate your Spider 360 2000 Series electronic dartboard for accurate play and long-lasting performance.

Quick Answer

Mount your Spider 360 2000 Series dartboard at the official height of 5 feet 8 inches to the bullseye, with a 7-foot 9.25-inch throw line, then calibrate the electronic scoring sensors for accurate play.

Why Mounting Height and Distance Matter

Getting the height and distance right is critical for consistent practice and fair games. The official tournament standard places the bullseye at 5 feet 8 inches from the floor, with the throw line (oche) exactly 7 feet 9.25 inches from the face of the board. Even a small deviation can throw off your muscle memory and make league or casual play feel wrong.

The Spider 360 2000 Series is designed to match these exact tournament specs, so you can trust the dimensions once set. However, if you have limited wall space or play in a multi-use room, you may need to compromise on the throw distance. In that case, mark a temporary throw line with tape so you can move it when needed.

Power and Sensor Setup

The Spider 360 uses advanced sensor technology to register every dart instantly. Before mounting, plug in the board and run a quick sensor test by pressing each segment with your finger. If any segment does not register, check the connection cable or try a different power outlet. A common mistake is assuming the sensors work out of the box without verifying.

For best performance, keep the board away from direct sunlight or strong room lighting that could interfere with the optical sensors. If you notice missed scores during play, recalibrate using the board's settings menu.

Step-by-Step Setup Guide

Choose Your Mounting Location: Select a wall with at least 3 feet of clearance on each side and 5 feet behind the throw line. Ensure the wall can support the board's weight (about 10-12 lbs). Use a stud finder to locate a wall stud for the mounting bracket, or use heavy-duty drywall anchors if no stud is available. Check that the wall is flat and free of obstructions like light switches or vents.
Mark and Install the Mounting Bracket: Measure 5 feet 8 inches from the floor and mark that spot for the bullseye center. Attach the mounting bracket so its center aligns with your mark. Use a level to ensure the bracket is perfectly horizontal. A tilted bracket will cause darts to land at inconsistent angles. Double-check the bracket level before tightening all screws.
Measure and Mark the Throw Line: From the face of the mounted board, measure 7 feet 9.25 inches outward and mark the floor with tape or a throw line mat. The line should be at least 2 feet wide to allow a comfortable stance. Many players forget to account for the board's thickness, so measure from the board's front surface, not the wall. If using tape, replace it when it wears to keep the line visible.
Connect Power and Calibrate Sensors: Plug the board into a nearby outlet and turn it on. Navigate to the settings menu and select 'Sensor Calibration' or 'Test Mode'. Press each numbered segment and bullseye to verify registration. If a segment fails, clean the sensor area with a dry cloth and retry. Perform this calibration monthly to maintain accuracy.
Hang the Board and Test Play: Align the board's backplate with the bracket and secure it according to the manufacturer's instructions. Throw a few practice darts to confirm the sensors register correctly and the board feels stable. If the board wobbles, tighten the bracket screws or adjust the mounting hooks. Check that the board does not shift when darts are removed.

Product Details

Spider 360 2000 Series Home Dartboard Of Champions: The Spider 360 2000 Series has an official 15.5-inch target area and commercial-grade durability. This means the board is built to withstand heavy daily use and matches tournament dimensions, so your practice directly translates to league play.
Spider 360 2000 Series Home Dartboard Of Champions